Home > Products > Dante Audio

Dante ® 2CH XLR Input Adapter

VLDT-XL2DT

Data Sheet

Product Inquiry Form

Product Description

The VLDT-XL2DT Dante ® 2CH XLR Input Adapter is an audio transmitter based on the Dante ® Ultimo 2x2 solution. It converts two-channel balanced/unbalanced XLR analog audio into Dante ® 2CH digital audio, then transmits the audio to the receiving end through network (Dante ®). Analog audio input supports 5-level sensitivity adjustments. The adapter supports local USB-C port power supply as well as PoE function.

Featured Highlights

  • Two-channel XLR analog audio to Dante ® 2CH digital audio

  • Dante ® audio sampling rate supports 44.1/48/88.2/96KHz@24bit

  • Dante ® audio delay supports 1/2/5ms (configurable)

  • Analog audio input supports 5-level sensitivity adjustment (+24dBu, +4dBu, 0dBu, 0dBv, -10dBv)

  • Supports local USB-C port power supply and PoE function (Class 0 802.3af PoE)

  • Compact design for easy and flexible installation

Specifications

Technical
Audio Formats     LPCM 2.0    
Frequency Response     20Hz to 20kHz (-/+0dB)    
Dynamic Range     >130dB, 1kHzA-weighted    
Audio S/N Ratio     >130dB, 1kHzA-weighted    
Audio THD+N     < 0.01% at +4dBu, 1KHz    
Audio Output Sync Delay    <10ms    
Audio Latency     Configurable Dante® device latency

(Supports 1, 2 or 5ms configurable using Dante ®Controller)    
Connection    
Input Ports         2x CH1/CH2 XLR IN [XLR female plug, with 30cm cable]

1x POWER [USB-C power and firmware update port,

12-pin female
Output Ports         1x DANTE [RJ45 connector, Digital audio in/out, PoE]
Control Ports         1x POWER [USB-C power and firmware update port, 12-pin female]

1x RESET button [System reboot button]

1x USB-C LED [Green color, USB 5V indicator]
Mechanical    
Housing     Plastic Enclosure    
Color     Black    
Dimensions     115mm [L] × 40mm [W] × 28mm [H]    
Weight     0.09g    
Power Supply Voltage     5V   
Power Supply Current Draw     2W    
Operating Temperature     0°C ~ 40°C / 32°F ~ 104°F  
Storage Temperature     -20°C ~ 60°C / -4°F ~ 140°F   
Relative Humidity     20 - 80% RH (relative humidity, non-condensing)
ESD Protection     IEC 61000-4-2: ±8kV (Air-gap discharge) & ±4kV (Contact discharge)

Related Products